Free Shipping
30 Night Sleep Trial
1 Year Limited Warranty

Certified Renewed Cube Sleep System

A thermostat for your bed. Perfect if you want a single bed temperature all night long. Simple & easy to use.

 

Includes:

+ 1 Certified Renewed Cube control unit (2 for WE)

+ 1 New Chilipad Cool Mesh mattress pad

+ 1 Remote control (2 for WE)


slide#0
slide#1
slide#2
slide#3
slide#4
slide#5
slide#6
slide#7
slide#8
slide#9
Step 1 • Me vs We
Step 2 • Size

$389.00

OR

Out of stock

Factory Certified Refurbished

Certified Renewed Cube Sleep System

Cube sleep system

What’s included?

Renewed Cube Control Unit & New Cool Mesh Pad
Cool mesh pad

Cool Mesh™ Pad

Reversible for Customized Comfort

The Cool Mesh side provides maximum cooling effect while the quilted cotton blend side provides cool comfort.

Works for 1 or 2 Sleepers

Choose to cover half the bed with a ME pad or an entire bed with the WE pad, which provides the ability to temperature regulate each side independently.

Fits Any Mattress Profile

Can fit any mattress height. The ME Pad even works on split adjustable beds.

Simple Installation and Easy Cleaning

Elastic straps allow for quick installation and removal for cleaning. 100% machine washable and dryable.

Convenience Customized

The pad connection can be placed at either end of the bed to accommodate multiple bed frame styles, power source locations and access to the control unit.

No Electrical Wires or EMFs

The pad has no electrical connections or wires, therefore zero EMFs.

Certified renewed cube sleep system

Renewed Cube Control Unit

Active Cooling

Temperature ranges from 55-115°F / 13-46°C so you can set it to your ideal bed temperature and get your best sleep possible.

On-Device Temperature Controls

Control your bed temperature with accessible on-device buttons.

Fits Under the Bed

Place under bed frames 8" or more for a minimalist look.

Cube remote

Remote Control

Easily Change the Temperature

Set or change your bed temperature without having to get out of bed or using a mobile app.

Specs

ME - Dimensions

Queen

30 x 80in (76 x 203cm)

King

30 x 80in (96 x 203cm)

Cal King

36 x 84in (91 x 213cm)

WE - Dimensions

Queen

60 x 80in (152 x 203cm)

King

76 x 80in (193 x 203cm)

Cal King

72 x 84in (183 x 213cm)

Pad Thickness

1/4" (6.35mm)

EMF Transmission

Low EMF

Surface Fibers

100% Polyester

Internal Design

1.8" (3.2mm) Silicone Tubing

Fill

Polyester

Bottom Material

Poly-Cotton Blend

Connection

8ft (2.4m) Tubing

Wash Care

Machine wash cold, gentle cycle, tumble dry no heat, do not bleach, do not iron, do not dry clean

Frequently asked questions

What exactly comes with the Cube?

The Cube is a temp-controlled mattress pad controlled by an attached control unit with a water tank. As a new user, you’ll receive a reversible, hydro-powered cool mesh mattress pad, a control unit, and a remote to conveniently adjust mattress pad temperature. Our innovative product cools or heats your bed between 55-115°F to create a revolutionary, customizable sleep environment.

How do I set up the Cube?

View the Instructional video!

Real Simple included the Cube in its list of best cooling mattress toppers in 2021. And it actually is real simple to use. Here’s the basic order of operations we generally recommend for new users:

1. Mattress as base

2. chiliPAD (connecting tubes can go at the head or foot of the bed)

3. Fitted sheet

4. Blanket or duvet on top (think of it as a refrigerator: if the door is left open, all the cold air will be let out; using a top layer traps the air to regulate your temperature preference!)

The control unit measures 12" x 12"x 12" and can be placed next to your bed. (While it can be placed under the bed, ensure there’s ample space for ventilation; a clearance of 18 inches on all sides is recommended).

How do I set a comfortable temperature? Does it have to be set low?

Since everyone is unique, it may take a few nights to find your own sweet spot. Some like it warm while others like it cool. Sleep studies show the ideal sleep temperature for optimal rest & recovery is 60-68ºF (15-20?C). Ultimately, if you are unsure where to begin, start at 65°F (18?C) and adjust up or down from there. No matter where you end up, temperature-wise, the Cube will help you master the art of getting amazing deep sleep!

Why is getting deep sleep so important

Deep sleep helps your body and mind heal. Deep sleep has restorative power for us physically, including cell regeneration, a strengthened immune system, tissue and bone repair, and more. According to the CDC, more than one-third of American adults are not getting enough sleep on a regular basis. A good night’s sleep can help to maintain blood sugar levels, shed excess fat, and reduce the risk of metabolic diseases like obesity and diabetes.

Can I use the Cube on just half of our bed?

Yes! The Cube can be optimized for one or two sleepers. The mattress topper is available in Me & We, Queen, King, and Cal King sizes. “Me” sizes are designed for one sleeper (one control unit) and cover half of the mattress; “We” sizes are designed for two sleepers (two control units) and cover the entire mattress. Even better, if you purchase the WE unit, you and your partner get two control units so that you can each find your ideal sleep temperature, night after night.

Can my environment effect the peak performance of the sleep system?

Peak performance is dependent on multiple factors such as ambient temperature, individual body mass and humidity and may not be suitable to replace conventional A/C.

Do I also clean the control unit?

Yes, we recommend cleaning the system once per month. Add one packet of the Cube cleaning solution to your cube, ensuring it’s connected to your pad so the solution can clean the tubes inside your pad as well. You can purchase packets of the solution on this page or at chilisleep.com/collections/all.

It's easy + quick:

+ Empty your cube/control unit

+ Fill it with clean, distilled water

+ Pour in the Cube cleaning solution

+ Connect your cube/control unit to pad and run it on "HI" for 1 hour

+ Drain the water mixture from the cube/control unit

+ Refill with distilled water + run like normal

+ If possible, use a can of compressed air to blow around side vents

What is your shipping and return policy?

+ Fast and free standard shipping and returns. Will be shipped in 1-2 business days.

+ 30-night sleep trial (full refund included)

+ 2-year warranty

+ Straightforward and easy assembly and maintenance instructions

Will a WE sleep system work with an adjustable bed?

We recommend two ME Sleep Systems rather than one WE Sleep System for Split Adjustable Beds. Because both sides adjust independently, placing two ME pads on the mattress will allow each side to adjust without damage to the pad or restricting the adjustable positions.

Additionally, we advise installing ME pads placed on adjustable beds with the connection hoses at the foot of the bed. After installation and during use, make sure that the hose remains loose (not taut) and free from crimping between the mattress and bed frame, which can damage the hose.

How do I wash the Cool Mesh pad?

We recommend a front-loading washer (or a top loader without an agitator). Secure the pad tubes with a thick rubber band, rope, etc. Wash with cold water on a delicate cycle.

To dry the pad, keep the pad tubes secured and dry on a delicate cycle with no heat. Do not bleach, do not iron, and do not dry-clean the pad.

Make sure the pad is completely dry before reconnecting to a power source.

Sign up for our newsletter